How To Clean Silicone Molds For Making Crayons. (it took about 15 minutes for crayons this size.) keep your hands steady while taking them out of the oven. Preheat oven to 220 degrees f.
Due to popular request, here is the simple answer how i clean my silicone molds. The silicone molds are flexible and it’ll be very difficult to hold a burning hot silicone mold full of melted hot wax flat as you remove the. The best way to melt crayons.
Break crayons into small (1/2 inch or less) pieces and fill your molds not quite all the way to the top.
Remove the mold, set it in the sink, and rinse with water. Dampen a clean cloth or rag and rub it over the baking soda until it forms a paste. Break crayons into small pieces.
If you click on one of these links and buy crayon molds, i get a small percentage of the sale at no additional cost to you.
This will save you so much time, i promise! Then you can break them. Shake the water off and sprinkle baking soda over all areas with food stains.
Break the crayons into smaller pieces.
Bake for approximately 15 minutes until completely melted. Line your cookie sheet with parchment paper. Put the silicone bakeware into the oven and let warm for ten minutes to heat the food stains.
We do not recommend placing silicone molds in the dishwasher.
The silicone molds are flexible and it’ll be very difficult to hold a burning hot silicone mold full of melted hot wax flat as you remove the mold from the oven. Use an exacto knife to cut down the seam of the crayon and the paper should easily remove itself. How to clean silicone molds after melting crayons.
Once the crayons have completely melted into liquid, carefully remove the silicone mold from the oven.
Fill every heart in the silicone mold with broken crayons. Use the freezer to speed cooling up. The amount of crayons that you need per mold will vary based on the size of the mold, as well as the thickness of the crayon you desire.